Original file
Smart ForTwo Bosch ME17.9.20 1780_890_ / 10SW033789
An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Smart ForTwo, hardware number 1780_890_ and software number 10SW033789, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Smart ForTwo0.9 petrol 90PS
- Control unit
- Bosch ME17.9.20
- Read type
- Calibration only (data set)
- File
- 2,560.00 KB · Flash
- Hardware number
- 1780_890_
- Software number
- 10SW033789
- Software / calibration
- 2819022405
Technical data
| Brand | Smart |
|---|---|
| Car model | ForTwo |
| Engine | 0.9 petrol 90PS |
| Power | 90.0PS / 66.2kW |
| Control unit | Bosch ME17.9.20 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 1780_890_ |
| Software number | 10SW033789 |
| File type | Original flash read |
|---|---|
| File size | 2,560.00 KB (2,621,440 bytes) |
| File key | de3af1f0c4e73f28 |
| ECU name | ME17.9.20 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW033789 | Offset in the file: 0x20001A |
| Software / calibration | 2819022405 | Offset in the file: 0x2299C0 |
| Data set number | 2819031706 | Offset in the file: 0x2299CB |
| Bosch project identifier (EPK) | 39/1/ME17_9_20/15/P_1220//r1780_890_/// | Offset in the file: 0x226BC0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 1780_890_ and software number 10SW033789. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch ME17.9.20
| Hardware | Software | Vehicles |
|---|---|---|
| 0442731220 | 1037548380 | Renault Twingo |
| 0524231220 | 10SW052423 | Smart ForTwo |
| 0528601220 | 10SW052860 | Smart Roadster |
| 10SW0508401220_8E0 | 10SW050840 | Smart ForTwo |
| 1780_A70_ | 10SW056336 | Smart ForTwo Brabus |
| 2819021104 | 10SW017083 1220_890 | Smart ForTwo 0,9T |
| 2819025904 | 10SW017574 1220_A20 | Smart ForTwo 0,9 T |
| 2819026106 | 10SW052128 1220_8E0 | Smart ForTwo 0,9T |