Original file

Smart ForTwo Brabus Bosch ME17.9.20 1780_A70_ / 10SW056336

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Smart ForTwo Brabus, hardware number 1780_A70_ and software number 10SW056336, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart ForTwo Brabus0.9 petrol 109PS
Control unit
Bosch ME17.9.20
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Hardware number
1780_A70_
Software number
10SW056336
Software / calibration
2819027006

Technical data

Vehicle
BrandSmart
Car modelForTwo Brabus
Engine0.9 petrol 109PS
Power109PS / 80.2kW
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Hardware number1780_A70_
Software number10SW056336
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key1467be1f602a0fe7
Identification read from the file
ECU nameME17.9.20
Read typeCalibration only (data set)
Bosch part / software10SW056336Offset in the file: 0x20001A
Software / calibration2819027006Offset in the file: 0x2373B6
Data set number2819036407Offset in the file: 0x2373C1
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_A70_///Offset in the file: 0x233F80

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 1780_A70_ and software number 10SW056336. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
052423122010SW052423Smart ForTwo
052860122010SW052860Smart Roadster
10SW0508401220_8E010SW050840Smart ForTwo
1780_890_10SW033789Smart ForTwo
281902110410SW017083 1220_890Smart ForTwo 0,9T
281902590410SW017574 1220_A20Smart ForTwo 0,9 T
281902610610SW052128 1220_8E0Smart ForTwo 0,9T
281902730610SW053431Renault Twingo

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page