Original file

Smart ForTwo 0,9T Bosch ME17.9.20 2819021104 / 10SW017083 1220_890

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Smart ForTwo 0,9T, hardware number 2819021104 and software number 10SW017083 1220_890, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart ForTwo 0,9T0.9 petrol 90.0PS / 66.2kW
Control unit
Bosch ME17.9.20
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Hardware number
2819021104
Software number
10SW017083 1220_890
Bosch part / software
10SW017083

Technical data

Vehicle
BrandSmart
Car modelForTwo 0,9T
Engine0.9 petrol 90.0PS / 66.2kW
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Hardware number2819021104
Software number10SW017083 1220_890
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keyc48609e98f577f42
Identification read from the file
ECU nameME17.9.20
Read typeCalibration only (data set)
Bosch part / software10SW017083Offset in the file: 0x20001A
Software / calibration2819021104Offset in the file: 0x2299C0
Data set number2819038804Offset in the file: 0x2299CB
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_890_///Offset in the file: 0x226BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 2819021104 and software number 10SW017083 1220_890. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
052860122010SW052860Smart Roadster
10SW0508401220_8E010SW050840Smart ForTwo
1780_890_10SW033789Smart ForTwo
1780_A70_10SW056336Smart ForTwo Brabus
281902590410SW017574 1220_A20Smart ForTwo 0,9 T
281902610610SW052128 1220_8E0Smart ForTwo 0,9T
281902730610SW053431Renault Twingo
281902850610SW056603Smart ForTwo

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page