Original file

Renault Twingo Bosch ME17.9.20 2819027306 / 10SW053431

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Renault Twingo, hardware number 2819027306 and software number 10SW053431, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Twingo1.0
Control unit
Bosch ME17.9.20
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Hardware number
2819027306
Software number
10SW053431
Software / calibration
r1780_8E0_

Technical data

Vehicle
BrandRenault
Car modelTwingo
Engine1.0
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Hardware number2819027306
Software number10SW053431
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key2defbaac39ce42b4
Identification read from the file
ECU nameME17.9.20
Read typeCalibration only (data set)
Bosch part / software10SW053431Offset in the file: 0x20001A
Software / calibrationr1780_8E0_Offset in the file: 0x227408
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_8E0_///Offset in the file: 0x227408

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 2819027306 and software number 10SW053431. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
1780_A70_10SW056336Smart ForTwo Brabus
281902110410SW017083 1220_890Smart ForTwo 0,9T
281902590410SW017574 1220_A20Smart ForTwo 0,9 T
281902610610SW052128 1220_8E0Smart ForTwo 0,9T
281902850610SW056603Smart ForTwo
281902890510SW040247 1220_A20Smart ForTwo 0,9T
281903480510SW010013Smart ForTwo Brabus
6162RD0375748R1037548380Renault Twingo

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page