Original file

Smart ForTwo Bosch ME17.9.20 2819028506 / 10SW056603

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Smart ForTwo, hardware number 2819028506 and software number 10SW056603, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart ForTwo1.0 71PS
Control unit
Bosch ME17.9.20
Read type
Calibration only (data set)
File
2,560.00 KB · Flash
Hardware number
2819028506
Software number
10SW056603

Technical data

Vehicle
BrandSmart
Car modelForTwo
Engine1.0 71PS
Power71PS / 52.2kW
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Hardware number2819028506
Software number10SW056603
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key382eeb3ce5fb1f24
Identification read from the file
ECU nameME17.9.20
Read typeCalibration only (data set)
Bosch part / software10SW056603Offset in the file: 0x20001A
Software / calibration2819028506Offset in the file: 0x22A20C
Data set number2819037907Offset in the file: 0x22A217
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_8E0_///Offset in the file: 0x227408

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 2819028506 and software number 10SW056603. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.20

HardwareSoftwareVehicles
281902110410SW017083 1220_890Smart ForTwo 0,9T
281902590410SW017574 1220_A20Smart ForTwo 0,9 T
281902610610SW052128 1220_8E0Smart ForTwo 0,9T
281902730610SW053431Renault Twingo
281902890510SW040247 1220_A20Smart ForTwo 0,9T
281903480510SW010013Smart ForTwo Brabus
6162RD0375748R1037548380Renault Twingo
MCE0861TGLMRH4720017310SW017078Smart ForTwo

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page