Original file

Smart ForTwo Bosch ME17.9.20 MCE1712TGLMRH56270173 / 1037551934

An original (stock) flash read of the Bosch ME17.9.20 control unit, fitted in Smart ForTwo, hardware number MCE1712TGLMRH56270173 and software number 1037551934, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart ForTwo0.9 petrol 70PS
Control unit
Bosch ME17.9.20
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
MCE1712TGLMRH56270173
Software number
1037551934
Bosch part / software
10SW000607
Software / calibration
2819028701

Technical data

Vehicle
BrandSmart
Car modelForTwo
Engine0.9 petrol 70PS
Power70.0PS / 51.5kW
Control unit
Control unitBosch ME17.9.20
ECU makerBosch
Hardware numberMCE1712TGLMRH56270173
Software number1037551934
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keya9ec48b7e495fe9f
Identification read from the file
ECU nameME17.9.20
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW000607Offset in the file: 0x02001A
Software / calibration2819028701Offset in the file: 0x228ECA
Data set number2819031602Offset in the file: 0x228ED5
Internal build stringCB_015_TC1782_1.3.1Offset in the file: 0x00D8FB
Bosch project identifier (EPK)39/1/ME17_9_20/15/P_1220//r1780_860_///Offset in the file: 0x02E390

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MCE1712TGLMRH56270173 and software number 1037551934. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Smart ForTwoFlash2,560.00 KB€15Add to cart

All reads of MCE1712TGLMRH56270173 / 1037551934

Other pairs of Bosch ME17.9.20

Bosch ME17.9.20 original files

The Bosch ME17.9.20 unit page