Original file

Hyundai i30 Bosch ME17.9.21 10SW001227

An original (stock) flash read of the Bosch ME17.9.21 control unit, fitted in Hyundai i30, software number 10SW001227, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Hyundai i301.4 petrol
Control unit
Bosch ME17.9.21
Read type
Calibration only (data set)
File
1,536.00 KB · Flash
Software number
10SW001227
Software / calibration
JDE66E4D6ARSN2J0

Technical data

Vehicle
BrandHyundai
Car modeli30
Engine1.4 petrol
Control unit
Control unitBosch ME17.9.21
ECU makerBosch
Software number10SW001227
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File key8904d753a1d7b88d
Identification read from the file
ECU nameME17.9.21
Read typeCalibration only (data set)
Bosch part / software10SW001227Offset in the file: 0x02001A
Software / calibrationJDE66E4D6ARSN2J0Offset in the file: 0x03FE0C
Bosch project identifier (EPK)50/1/ME17/147/ME17921//ECK802J0/JDE66E4D6ARSN2J0//Offset in the file: 0x03FE0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.21 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW001227. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.21

HardwareSoftwareVehicles
Kia RioKia Rio
000211Hyundai i20
1037548938Ducati Multistrada
1037555251Hyundai i30
10SW040220Kia cee`d
MGB-JLC02FS0050K10SW037440Hyundai i20
MGB-JLD02F00050K17980021Hyundai i20

Bosch ME17.9.21 original files

The Bosch ME17.9.21 unit page