Original file
Hyundai i20 Bosch ME17.9.21 MGB-JLC02FS0050K / 10SW037440
An original (stock) flash read of the Bosch ME17.9.21 control unit, fitted in Hyundai i20, hardware number MGB-JLC02FS0050K and software number 10SW037440, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Hyundai i201.2 petrol 75PS
- Control unit
- Bosch ME17.9.21
- Read type
- OBD read (no boot area)
- File
- 1,536.00 KB · Flash
- Hardware number
- MGB-JLC02FS0050K
- Software number
- 10SW037440
Technical data
| Brand | Hyundai |
|---|---|
| Car model | i20 |
| Engine | 1.2 petrol 75PS |
| Power | 75.0PS / 55.2kW |
| Control unit | Bosch ME17.9.21 |
|---|---|
| ECU maker | Bosch |
| Hardware number | MGB-JLC02FS0050K |
| Software number | 10SW037440 |
| File type | Original flash read |
|---|---|
| File size | 1,536.00 KB (1,572,864 bytes) |
| File key | e7bf5bdd88559d7e |
| ECU name | ME17.9.21 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1724 | |
| Bosch part / software | 10SW037440 | Offset in the file: 0x04001A |
| Internal build string | ME(D)/EDC17 B_CB.02.04.00 | Offset in the file: 0x00FC58 |
| Bosch project identifier (EPK) | 50/1/ME17/147/ME17921//ECKU03H7/MGB_JLC02FS0050K// | Offset in the file: 0x03FE0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch ME17.9.21 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number MGB-JLC02FS0050K and software number 10SW037440. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch ME17.9.21
| Hardware | Software | Vehicles |
|---|---|---|
| Kia Rio | Kia Rio | |
| 000211 | Hyundai i20 | |
| 1037548938 | Ducati Multistrada | |
| 1037555251 | Hyundai i30 | |
| 10SW001227 | Hyundai i30 | |
| 10SW040220 | Kia cee`d | |
| MGB-JLD02F00050K | 17980021 | Hyundai i20 |