Original file

Toyota Aygo Bosch ME17.9.52 89663-0H100 / 1037543402

An original (stock) flash read of the Bosch ME17.9.52 control unit, fitted in Toyota Aygo, hardware number 89663-0H100 and software number 1037543402, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Toyota Aygo1.0
Control unit
Bosch ME17.9.52
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
89663-0H100
Software number
1037543402
Software / calibration
ME17952C0AMEE_C105S1

Technical data

Vehicle
BrandToyota
Car modelAygo
Engine1.0
Control unit
Control unitBosch ME17.9.52
ECU makerBosch
Hardware number89663-0H100
Software number1037543402
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keyd6f1fbb256c8fa34
Identification read from the file
ECU nameME17.9.52
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software1037543402Offset in the file: 0x14001A
Software / calibrationME17952C0AMEE_C105S1Offset in the file: 0x035940
Internal build stringPCFG:CB/072_1782_1.5.0Offset in the file: 0x00FC5C
Bosch project identifier (EPK)50/1/MEG17952/72/MEX17952//ME17952C0AMEE_C105S1///Offset in the file: 0x035940

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.52 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 89663-0H100 and software number 1037543402. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.52

HardwareSoftwareVehicles
1037552355Citroën C1
1037552357Peugeot 108
10SW008107Peugeot 108, Peugeot Aygo, Toyota
10SW008109Peugeot 108
89663-0DD901037551798Toyota Yaris
89663-0DK111037550475Toyota Yaris
89663-0H0711037550470Toyota Aygo
89663-0H1201037552354Toyota Aygo

Bosch ME17.9.52 original files

The Bosch ME17.9.52 unit page