Original file

Toyota Bosch ME17.9.53 89663-0H250 / 10SW031630

An original (stock) flash read of the Bosch ME17.9.53 control unit, fitted in Toyota, hardware number 89663-0H250 and software number 10SW031630, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Toyota1.0 70PS
Control unit
Bosch ME17.9.53
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
89663-0H250
Software number
10SW031630
Software / calibration
ME17953C0AMEN_C120S1

Technical data

Vehicle
BrandToyota
Engine1.0 70PS
Power70.0PS / 51.5kW
Control unit
Control unitBosch ME17.9.53
ECU makerBosch
Hardware number89663-0H250
Software number10SW031630
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key3650a0b1cf361801
Identification read from the file
ECU nameME17.9.53
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / software10SW031630Offset in the file: 0x14001A
Software / calibrationME17953C0AMEN_C120S1Offset in the file: 0x042F68
Internal build stringPCFG:CB/072_1782_1.5.0Offset in the file: 0x00FC5C
Bosch project identifier (EPK)49/1/ME17953/72/MEX17953//ME17953C0AMEN_C120S1///Offset in the file: 0x042F68

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.53 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 89663-0H250 and software number 10SW031630. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Toyota AygoFlash2,560.00 KB€15Add to cart

All reads of 89663-0H250 / 10SW031630

Other pairs of Bosch ME17.9.53

HardwareSoftwareVehicles
031630Toyota Aygo
056040Citroën C1
10SW031629Citroën C1
10SW034888Toyota Yaris
10SW039145Citroën C1
10SW039148Citroën C1
0261S19305031630Toyota Aygo

Bosch ME17.9.53 original files

The Bosch ME17.9.53 unit page