Original file

Fiat 500 - 595 - 695 Bosch ME17 0261S15090 / 005387

An original (stock) flash read of the Bosch ME17 control unit, fitted in Fiat 500 - 595 - 695, hardware number 0261S15090 and software number 005387, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat 500 - 595 - 695
Control unit
Bosch ME17
Read type
OBD read (no boot area)
File
1,536.00 KB · Flash
Hardware number
0261S15090
Software number
005387
Bosch part / software
10SW005387
Vehicle maker's hardware number
55273723
Software / calibration
173072105B0

Technical data

Vehicle
BrandFiat
Car model500 - 595 - 695
Control unit
Control unitBosch ME17
ECU makerBosch
Hardware number0261S15090
Software number005387
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
From the file nameFiat SW version HW 500
File keye3951de5dd3159ef
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software10SW005387Offset in the file: 0x08001A
Vehicle maker's hardware number55273723Offset in the file: 0x0626C9
Software / calibration173072105B0Offset in the file: 0x07FF08
Internal build string11B.08.03.00RBOffset in the file: 0x00E354
Bosch project identifier (EPK)35/1/MED17/9/ME1730//173072105B0///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S15090 and software number 005387. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17

HardwareSoftwareVehicles
1037547410Hyundai Mistra
0087510W910BBDGY51037395627BMW E81/E87, BMW 1er
02285530061090014000Mercedes-Benz B200
0261S139311755279467Chrysler Jeep
33980-69L01037516997Suzuki Swift
7E1142QD9VMS410SW003194Can-Am Maverick
CRD3-651-0WDAGAPP_G110D216519014502Mercedes-Benz C220, Mercedes-Benz C250
CRD3-651-0WDAGAPP_G120D226519014502Mercedes-Benz C220, Mercedes-Benz C200

Bosch ME17 original files