Original file

Ford S-Max Bosch ME9.0 0261209109 / 1037387408

An original (stock) flash read of the Bosch ME9.0 control unit, fitted in Ford S-Max, hardware number 0261209109 and software number 1037387408, 2,049.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford S-Max2.5 petrol 220PS
Control unit
Bosch ME9.0
Read type
Full read (boot area included)
File
2,049.00 KB · Flash
Hardware number
0261209109
Software number
1037387408
Vehicle maker's hardware number
6G9N-12A650-PJ
Software / calibration
6G9N-12B684-BA

Technical data

Vehicle
BrandFord
Car modelS-Max
Engine2.5 petrol 220PS
Power220.0PS / 161.8kW
Control unit
Control unitBosch ME9.0
ECU makerBosch
Hardware number0261209109
Software number1037387408
File
File typeOriginal flash read
File size2,049.00 KB (2,098,176 bytes)
File keya566c5875665492f
Identification read from the file
ECU nameME9.0
Read typeFull read (boot area included)
Bosch part / software1037387408Offset in the file: 0x200026
Vehicle maker's hardware number6G9N-12A650-PJOffset in the file: 0x002880
Software / calibration6G9N-12B684-BAOffset in the file: 0x002768
Engine description6G9N-14C204-BJOffset in the file: 0x1CD183
Bosch project identifier (EPK)60/1/ME90C/19/3X25T00//P02ADF00_F0/P02ADF00_F0/191006111248/Offset in the file: 0x1C22B0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME9.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261209109 and software number 1037387408. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Ford MondeoFlash2,049.00 KB€15Add to cart
Ford S-MaxFlash2,049.00 KB€15Add to cart
Ford S-MaxFlash2,049.00 KB€15Add to cart
Ford S-MaxFlash2,049.00 KB€15Add to cart
Ford S-Max 2.5 TurboFlash6,144.00 KB€15Add to cart

All reads of 0261209109 / 1037387408

Other pairs of Bosch ME9.0

HardwareSoftwareVehicles
02612090961039S17596Ford Focus, Ford Focus RS
02612091081039S13190Volvo S80, Volvo S60, Volvo C70
02612091081039S14948Volvo S80
02612091091037381606Ford S-Max BR PERFORMANCE
02612091091037393957Ford Mondeo, Ford S-Max NWM-RW300, Ford Focus
02612091091039S15161Ford S-max
02612091091039S15356Ford S-Max, Ford Focus ST
02612091091039S16521Ford S-Max, Ford Mondeo

Bosch ME9.0 original files

The Bosch ME9.0 unit page