Original file
Ford SMAX Bosch ME9.0 6G9N-12A650-PH
An original (stock) flash read of the Bosch ME9.0 control unit, fitted in Ford SMAX, hardware number 6G9N-12A650-PH, 120.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Ford SMAX2.5 diesel 220PS
- Control unit
- Bosch ME9.0
- Read type
- Calibration only (data set)
- File
- 120.00 KB · Flash
- Hardware number
- 6G9N-12A650-PH
- Software / calibration
- 6G9N-14C204-BH
Technical data
| Brand | Ford |
|---|---|
| Car model | SMAX |
| Engine | 2.5 diesel 220PS |
| Power | 220.0PS / 161.8kW |
| Control unit | Bosch ME9.0 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 6G9N-12A650-PH |
| File type | Original flash read |
|---|---|
| File size | 120.00 KB (122,880 bytes) |
| File key | 60f929ea7820cf43 |
| ECU name | ME9.0 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Vehicle maker's hardware number | 6G9N-12A650-PH | Offset in the file: 0x00B106 |
| Software / calibration | 6G9N-14C204-BH | Offset in the file: 0x00B183 |
| Bosch project identifier (EPK) | 60/1/ME90C/19/3X25T00//P02ADD00_D0/P02ADD00_D0/280406162131/ | Offset in the file: 0x0002B0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch ME9.0 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 6G9N-12A650-PH. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch ME9.0
| Hardware | Software | Vehicles |
|---|---|---|
| 0261209533 | 1039S40284 | Ford Kuga |
| 0410121346 | Ford Focus | |
| 0809051246 | 378731 | Ford Focus |
| 6G9N-12A650-PF | Ford | |
| 6G9N-12A650-PH | 384266 | Ford S-Max |
| 6G9N-12A650-PK | Ford Mondeo, Ford S-Max | |
| 6G9N-12A650-PK | 393957 | Ford Mondeo |
| 9M51-12A650-CG | Ford Focus |