Original file

Maserati GranSport Bosch ME9.1 0261209311 / 1037535758

An original (stock) flash read of the Bosch ME9.1 control unit, fitted in Maserati GranSport, hardware number 0261209311 and software number 1037535758, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Maserati GranSport4.7 470PS
Control unit
Bosch ME9.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261209311
Software number
1037535758

Technical data

Vehicle
BrandMaserati
Car modelGranSport
Engine4.7 470PS
Power470.0PS / 345.7kW
Control unit
Control unitBosch ME9.1
ECU makerBosch
Hardware number0261209311
Software number1037535758
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key4027a724339c2b1f
Identification read from the file
ECU nameME9.1.1
Read typeFull read (boot area included)
ProcessorMPC555
Bosch part / software0261209311 / 1037535758Offset in the file: 0x1CCB68 / 0x1CCB75
Bosch project identifier (EPK)51/1/ME911/69/121.7//_911M_15_60A3/_A1TE000/220413/Offset in the file: 0x1C2270

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME9.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261209311 and software number 1037535758. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME9.1

HardwareSoftwareVehicles
Audi RS3Audi RS3
Audi TT RSAudi TT RS
Audi TTRSAudi TTRS
02612091071037391131Opel Omega DYNOTEK 3.6 V6, Opel Omega DYNOTEK
026120931110SW023363Maserati Granturismo S

Bosch ME9.1 original files

The Bosch ME9.1 unit page