Original file

Ford Bosch ME9 6G9N-12A650-PJ / 6G9N-12A650-PJ

An original (stock) flash read of the Bosch ME9 control unit, fitted in Ford, hardware number 6G9N-12A650-PJ and software number 6G9N-12A650-PJ, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford
Control unit
Bosch ME9
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6G9N-12A650-PJ
Software number
6G9N-12A650-PJ
Software / calibration
6G9N-14C204-BJ

Technical data

Vehicle
BrandFord
Control unit
Control unitBosch ME9
ECU makerBosch
Hardware number6G9N-12A650-PJ
Software number6G9N-12A650-PJ
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key02a05d9a39ea7d33
Identification read from the file
ECU nameME9.0
Read typeCalibration only (data set)
Vehicle maker's hardware number6G9N-12A650-PJOffset in the file: 0x1CD106
Software / calibration6G9N-14C204-BJOffset in the file: 0x1CD183
Bosch project identifier (EPK)60/1/ME90C/19/3X25T00//P02ADF00_F0/P02ADF00_F0/191006111248/Offset in the file: 0x1C22B0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6G9N-12A650-PJ and software number 6G9N-12A650-PJ. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME9

HardwareSoftwareVehicles
09G927750LEVolkswagen
113BQRRRRCitroën II - Phase I
5K0937085SVolkswagen
6G9N-12A650-PJFord S-Max
7G91-12K532-MF10125485AAFord S-Max
8201083804Renault Clio III
8C11-12K532-EB8C11-12K532-EBFord Transit
8P0920982FAudi

Bosch ME9 original files

The Bosch ME9 unit page