Original file

Ford Focus Bosch ME9 BV61-14C204-DFA / 10258803AA

An original (stock) flash read of the Bosch ME9 control unit, fitted in Ford Focus, hardware number BV61-14C204-DFA and software number 10258803AA, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Focus1.6 diesel
Control unit
Bosch ME9
File size
2,048.00 KB
Contents
Flash
Hardware number
BV61-14C204-DFA
Software number
10258803AA
Vehicle maker's hardware number
BV61-12A650-DFA
Software / calibration
AV61-12B684-AA01

Technical data

Vehicle
BrandFord
Car modelFocus
Engine1.6 diesel
Control unit
Control unitBosch ME9
ECU makerBosch
Hardware numberBV61-14C204-DFA
Software number10258803AA
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key4822cbf4889f5393
Identification read from the file
Vehicle maker's hardware numberBV61-12A650-DFAOffset in the file: 0x000200
Software / calibrationAV61-12B684-AA01Offset in the file: 0x0967F0
Engine descriptionBV61-14C204-DFAOffset in the file: 0x000218

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number BV61-14C204-DFA and software number 10258803AA. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME9

Bosch ME9 original files

The Bosch ME9 unit page