Original file

Ford Fiesta Bosch MED17.0.1 C1BY-12A650-DA / 1037540314

An original (stock) flash read of the Bosch MED17.0.1 control unit, fitted in Ford Fiesta, hardware number C1BY-12A650-DA and software number 1037540314, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Fiesta1.6
Control unit
Bosch MED17.0.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
C1BY-12A650-DA
Software number
1037540314
Software / calibration
C1BA-12B684-DB

Technical data

Vehicle
BrandFord
Car modelFiesta
Engine1.6
Control unit
Control unitBosch MED17.0.1
ECU makerBosch
Hardware numberC1BY-12A650-DA
Software number1037540314
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameL533CC0
File key1062b17620b1e09e
Identification read from the file
ECU nameMED17.0.1
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037540314Offset in the file: 0x08001A
Vehicle maker's hardware numberC1BY-12A650-DAOffset in the file: 0x00FC30
Software / calibrationC1BA-12B684-DBOffset in the file: 0x00FC00
Engine descriptionC1BY-14C204-DAOffset in the file: 0x06615B
Bosch project identifier (EPK)57/1/MED17/2/SIG16GGA//D1701_06F_106C_0L01/240712/222217/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number C1BY-12A650-DA and software number 1037540314. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0.1

Bosch MED17.0.1 original files

The Bosch MED17.0.1 unit page