Original file

Ford EcoSport Bosch MED17.0.1 DN15-14C204-AD / 1037539296

An original (stock) flash read of the Bosch MED17.0.1 control unit, fitted in Ford EcoSport, hardware number DN15-14C204-AD and software number 1037539296, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford EcoSport1.0
Control unit
Bosch MED17.0.1
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
DN15-14C204-AD
Software number
1037539296
Vehicle maker's hardware number
DN15-12A650-AD

Technical data

Vehicle
BrandFord
Car modelEcoSport
Engine1.0
Control unit
Control unitBosch MED17.0.1
ECU makerBosch
Hardware numberDN15-14C204-AD
Software number1037539296
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2ea47ef8a6d95d9c
Identification read from the file
ECU nameMED17.0.1
Read typeCalibration only (data set)
Bosch part / software1037539296Offset in the file: 0x04001A
Vehicle maker's hardware numberDN15-12A650-ADOffset in the file: 0x0677DE
Software / calibrationDN15-14C204-ADOffset in the file: 0x000000
Bosch project identifier (EPK)56/1/MED17/2/FOXGTDI//D1701_002_142G_1102/040213/164025/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number DN15-14C204-AD and software number 1037539296. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0.1

HardwareSoftwareVehicles
DG9A-12B684-XB10SW004458Ford Mondeo
DG9A-12B684-XB10SW006292Ford Mondeo
DG9A-12B684-XB10SW012061Ford
DG9A-12B684-XB10SW017026Ford
DV21-14C204-AE1037528704Ford C-Max, Ford B max
DV21-14C204-AF1037528704Ford B-Max
DV21-14C204-BE1037528703Ford B-Max
DV21-14C204-KA1037531326Ford B-Max, Ford T 2013 88.3KWKW

Bosch MED17.0.1 original files

The Bosch MED17.0.1 unit page