Original file

Ford Focus Bosch MED17.0.1 DV4A-14C204-ABA / 1037539008

An original (stock) flash read of the Bosch MED17.0.1 control unit, fitted in Ford Focus, hardware number DV4A-14C204-ABA and software number 1037539008, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Focus1.6 petrol 150PS
Control unit
Bosch MED17.0.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
DV4A-14C204-ABA
Software number
1037539008
Bosch part / software
10SW023802
Vehicle maker's hardware number
DV4A-12A650-MA
Software / calibration
CV6A-12B684-AA

Technical data

Vehicle
BrandFord
Car modelFocus
Engine1.6 petrol 150PS
Power150.0PS / 110.3kW
Control unit
Control unitBosch MED17.0.1
ECU makerBosch
Hardware numberDV4A-14C204-ABA
Software number1037539008
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2d8a8de344c1484c
Identification read from the file
ECU nameMED17.0.1
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software10SW023802Offset in the file: 0x08001A
Vehicle maker's hardware numberDV4A-12A650-MAOffset in the file: 0x00FC30
Software / calibrationCV6A-12B684-AAOffset in the file: 0x00FC00
Engine descriptionDV4A-14C204-ABAOffset in the file: 0x0685F3
Bosch project identifier (EPK)57/1/MED17/2/SIG16GGA//D1701_06E_106C_0L32/270417/132818/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number DV4A-14C204-ABA and software number 1037539008. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0.1

Bosch MED17.0.1 original files

The Bosch MED17.0.1 unit page