Original file

Ford Bosch MED17.0.1 F1B1-14C204-BCC / 10SW016027

An original (stock) flash read of the Bosch MED17.0.1 control unit, fitted in Ford, hardware number F1B1-14C204-BCC and software number 10SW016027, 256.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford1.6 petrol 180PS
Control unit
Bosch MED17.0.1
Read type
Calibration only (data set)
File
256.00 KB · Flash
Hardware number
F1B1-14C204-BCC
Software number
10SW016027
Vehicle maker's hardware number
F1B1-12A650-BCC

Technical data

Vehicle
BrandFord
Engine1.6 petrol 180PS
Power180.0PS / 132.4kW
Control unit
Control unitBosch MED17.0.1
ECU makerBosch
Hardware numberF1B1-14C204-BCC
Software number10SW016027
File
File typeOriginal flash read
File size256.00 KB (262,144 bytes)
File key7a4bb694c99ef699
Identification read from the file
ECU nameMED17.0.1
Read typeCalibration only (data set)
Bosch part / software10SW016027Offset in the file: 0x00001A
Vehicle maker's hardware numberF1B1-12A650-BCCOffset in the file: 0x0261BA
Software / calibrationF1B1-14C204-BCCOffset in the file: 0x0261A7
Bosch project identifier (EPK)57/1/MED17/2/SIG16GGA//D1701_06F_106C_0L20/020614/160230/Offset in the file: 0x03FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number F1B1-14C204-BCC and software number 10SW016027. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Ford Fiesta STFlash2,048.00 KB€15Add to cart
Ford FiestaFlash2,048.00 KB€15Add to cart

All reads of F1B1-14C204-BCC / 10SW016027

Other pairs of Bosch MED17.0.1

Bosch MED17.0.1 original files

The Bosch MED17.0.1 unit page