Original file

Ford Focus Bosch MED17.0.1 F1B1-14C204-BCD / 10SW016027

An original (stock) flash read of the Bosch MED17.0.1 control unit, fitted in Ford Focus, hardware number F1B1-14C204-BCD and software number 10SW016027, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Focus6.6
Control unit
Bosch MED17.0.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
F1B1-14C204-BCD
Software number
10SW016027
Bosch part / software
10SW025038
Vehicle maker's hardware number
F1B1-12A650-BCC
Software / calibration
C1BA-12B684-DB

Technical data

Vehicle
BrandFord
Car modelFocus
Engine6.6
Control unit
Control unitBosch MED17.0.1
ECU makerBosch
Hardware numberF1B1-14C204-BCD
Software number10SW016027
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7cf08209618d8710
Identification read from the file
ECU nameMED17.0.1
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software10SW025038Offset in the file: 0x08001A
Vehicle maker's hardware numberF1B1-12A650-BCCOffset in the file: 0x00FC30
Software / calibrationC1BA-12B684-DBOffset in the file: 0x00FC00
Engine descriptionF1B1-14C204-BCDOffset in the file: 0x0661A7
Bosch project identifier (EPK)57/1/MED17/2/SIG16GGA//D1701_06F_106C_0L20/020614/160230/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number F1B1-14C204-BCD and software number 10SW016027. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0.1

HardwareSoftwareVehicles
F1B1-14C204-BCBF1B1-14C204-BCBFord Fiesta
F1B1-14C204-BCC10SW016027Ford Fiesta, Ford Fiesta ST
F1B1-14C204-BCCF1B1-14C204-BCCFord Fiesta
F1B1-14C204-BCD10SW011596Ford Fiesta
F1B1-14C204-BCD10SW025038Ford Fiesta
F1B1-14C204-BCDF1B1-14C204-BCDFord Fiesta 1.6 ST, Ford Fiesta ST
F1B1-14C204-ZC1037548587Ford Fiesta ST, Ford Fiesta
F1B1-14C204-ZD10SW016016Ford Fiesta

Bosch MED17.0.1 original files

The Bosch MED17.0.1 unit page