Original file

Ford Focus 2017y EcoBoost Bosch MED17.0.1 F1FA-12B684-CA / 10SW022950

An original (stock) flash read of the Bosch MED17.0.1 control unit, fitted in Ford Focus 2017y EcoBoost, hardware number F1FA-12B684-CA and software number 10SW022950, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Focus 2017y EcoBoost1.0
Control unit
Bosch MED17.0.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
F1FA-12B684-CA
Software number
10SW022950
Vehicle maker's hardware number
F1FA-12A650-ARM

Technical data

Vehicle
BrandFord
Car modelFocus 2017y EcoBoost
Engine1.0
Control unit
Control unitBosch MED17.0.1
ECU makerBosch
Hardware numberF1FA-12B684-CA
Software number10SW022950
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameFord Focus 2017y 1.0 EcoBoost
File key82ffcca144b92ae2
Identification read from the file
ECU nameMED17.0.1
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software10SW022950Offset in the file: 0x00401A
Vehicle maker's hardware numberF1FA-12A650-ARMOffset in the file: 0x00FC30
Software / calibrationF1FA-12B684-CAOffset in the file: 0x00FC00
Engine descriptionF1FA-14C204-ARMOffset in the file: 0x1FFF4B
Internal build stringMED170_PBL_67_T3_DG506_1Offset in the file: 0x00FA58
Bosch project identifier (EPK)44/1/MED17/22/MEDECM//D1701_025_0442/Dst00//Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number F1FA-12B684-CA and software number 10SW022950. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0.1

HardwareSoftwareVehicles
F1FA-12B684-CA10SW007033Ford Fiesta
F1FA-12B684-CA10SW007101Ford Cmax
F1FA-12B684-CA10SW013022Ford
F1FA-12B684-CA10SW022466Ford Focus 2018y 1.0Ecoboost
F1FA-12B684-CAF1FA-14C204-ASKFord Focus 1.0 EcoBoost
F1FA-14B684-CAFord Focus
F1FA-14C204-DJEMED170_PBL_67_T3_DG506_1Ford Focus
F1GA-12A650-AJFFord S-Max

Bosch MED17.0.1 original files

The Bosch MED17.0.1 unit page