Original file
Ford Ecosport Bosch MED17.0.1 GN15-14C204-AMA / GN15-14C204-AMA
An original (stock) flash read of the Bosch MED17.0.1 control unit, fitted in Ford Ecosport, hardware number GN15-14C204-AMA and software number GN15-14C204-AMA, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Ford Ecosport1.0 · 140.0PS / 103.0kW
- Control unit
- Bosch MED17.0.1
- Read type
- Full read (boot area included)
- File
- 2,048.00 KB · Flash
- Hardware number
- GN15-14C204-AMA
- Software number
- GN15-14C204-AMA
- Bosch part / software
- 10SW007116
- Vehicle maker's hardware number
- GN15-12A650-AMA
- Software / calibration
- CV6A-12B684-BD
Technical data
| Brand | Ford |
|---|---|
| Car model | Ecosport |
| Engine | 1.0 |
| Fuel | Petrol |
| Power | 140.0PS / 103.0kW |
| Control unit | Bosch MED17.0.1 |
|---|---|
| ECU maker | Bosch |
| Hardware number | GN15-14C204-AMA |
| Software number | GN15-14C204-AMA |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 150d76c8ecb7b7ac |
| ECU name | MED17.0.1 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1767 | |
| Bosch part / software | 10SW007116 | Offset in the file: 0x08001A |
| Vehicle maker's hardware number | GN15-12A650-AMA | Offset in the file: 0x00FC30 |
| Software / calibration | CV6A-12B684-BD | Offset in the file: 0x00FC00 |
| Engine description | GN15-14C204-AMA | Offset in the file: 0x067B06 |
| Bosch project identifier (EPK) | 56/1/MED17/2/FOXGTDI//D1701_002_142G_1401/160714/103346/ | Offset in the file: 0x07FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.0.1 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number GN15-14C204-AMA and software number GN15-14C204-AMA. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.0.1
| Hardware | Software | Vehicles |
|---|---|---|
| G1B1-14C204-KD | G1B1-14C204-KD | Ford Fiesta |
| G1B1-14C204-KE | 10SW014972 | Ford Fiesta |
| G1B1-14C204-KE | DS-F1B1-12A650-HB | Ford Fiesta |
| G1B1-14C204-KE | G1B1-14C204-KE | Ford Fiesta |
| H1FA-12A650-AED | Ford Focus | |
| H1FA-12A650-BB | Ford Focus | |
| H1FA-14C204-BD | 1348066363 | Ford MkIII |
| HA6A-12B684-NA | 10SW036930 | Ford EcoSport |