Original file
Ford EcoSport Bosch MED17.0.1 HN15-14C204-AC / 10SW008993
An original (stock) flash read of the Bosch MED17.0.1 control unit, fitted in Ford EcoSport, hardware number HN15-14C204-AC and software number 10SW008993, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Ford EcoSport1.0 · 125.0PS / 91.9kW
- Control unit
- Bosch MED17.0.1
- Read type
- Full read (boot area included)
- File
- 2,048.00 KB · Flash
- Hardware number
- HN15-14C204-AC
- Software number
- 10SW008993
- Vehicle maker's hardware number
- HN15-12A650-AC
- Software / calibration
- CV6A-12B684-BD
Technical data
| Brand | Ford |
|---|---|
| Car model | EcoSport |
| Engine | 1.0 |
| Fuel | Petrol |
| Power | 125.0PS / 91.9kW |
| Control unit | Bosch MED17.0.1 |
|---|---|
| ECU maker | Bosch |
| Hardware number | HN15-14C204-AC |
| Software number | 10SW008993 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 20c61e45861a5e5f |
| ECU name | MED17.0.1 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1767 | |
| Bosch part / software | 10SW008993 | Offset in the file: 0x08001A |
| Vehicle maker's hardware number | HN15-12A650-AC | Offset in the file: 0x00FC30 |
| Software / calibration | CV6A-12B684-BD | Offset in the file: 0x00FC00 |
| Engine description | HN15-14C204-AC | Offset in the file: 0x067B06 |
| Bosch project identifier (EPK) | 56/1/MED17/2/FOXGTDI//D1701_002_142G_1401/160714/103346/ | Offset in the file: 0x07FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.0.1 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number HN15-14C204-AC and software number 10SW008993. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other reads of this pair
The same hardware and software numbers, read from other vehicles or at other times; each has its page.
| Vehicles | Size | Price | Add to cart |
|---|---|---|---|
| Ford EcoSport | 256.00 KB | €15 | Add to cart |
| Ford EcoSport | 2,048.00 KB | €15 | Add to cart |
| Ford EcoSport | 2,048.00 KB | €15 | Add to cart |
Other pairs of Bosch MED17.0.1
| Hardware | Software | Vehicles |
|---|---|---|
| H1FA-12A650-AED | Ford Focus | |
| H1FA-12A650-BB | Ford Focus | |
| H1FA-14C204-BD | 1348066363 | Ford MkIII |
| HA6A-12B684-NA | 10SW036930 | Ford EcoSport |
| HN15-14C204-EC | 10SW010056 | Ford EcoSport |
| HT11-14C204-BD | 10SW009590 | Ford Tourneo, Ford Transit Courier |
| HT11-14C204-BE | 016471 | Ford Tourneo |
| HT11-14C204-BE | 10SW016471 | Ford Tourneo, Ford Fiesta, Ford Tourneo Courier |