Original file

Ford EcoSport Bosch MED17.0.1 HN15-14C204-EC / 10SW010056

An original (stock) flash read of the Bosch MED17.0.1 control unit, fitted in Ford EcoSport, hardware number HN15-14C204-EC and software number 10SW010056, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford EcoSport1.0 petrol
Control unit
Bosch MED17.0.1
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
HN15-14C204-EC
Software number
10SW010056
Vehicle maker's hardware number
HN15-12A650-EC

Technical data

Vehicle
BrandFord
Car modelEcoSport
Engine1.0 petrol
Control unit
Control unitBosch MED17.0.1
ECU makerBosch
Hardware numberHN15-14C204-EC
Software number10SW010056
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key6e0376a57dda6b03
Identification read from the file
ECU nameMED17.0.1
Read typeCalibration only (data set)
Bosch part / software10SW010056Offset in the file: 0x04001A
Vehicle maker's hardware numberHN15-12A650-ECOffset in the file: 0x067B2A
Software / calibrationHN15-14C204-ECOffset in the file: 0x000000
Bosch project identifier (EPK)56/1/MED17/2/FOXGTDI//D1701_002_142G_1401/160714/103346/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number HN15-14C204-EC and software number 10SW010056. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0.1

HardwareSoftwareVehicles
H1FA-12A650-BBFord Focus
H1FA-14C204-BD1348066363Ford MkIII
HA6A-12B684-NA10SW036930Ford EcoSport
HN15-14C204-AC10SW008993Ford EcoSport
HT11-14C204-BD10SW009590Ford Tourneo, Ford Transit Courier
HT11-14C204-BE016471Ford Tourneo
HT11-14C204-BE10SW016471Ford Tourneo, Ford Fiesta, Ford Tourneo Courier
HT11-14C204-BEHT11-12A650-BEFord Transit Courier

Bosch MED17.0.1 original files

The Bosch MED17.0.1 unit page