Original file
Ford Tourneo Bosch MED17.0.1 HT11-14C204-BE / 016471
An original (stock) flash read of the Bosch MED17.0.1 control unit, fitted in Ford Tourneo, hardware number HT11-14C204-BE and software number 016471, 256.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Ford Tourneo1.0 100PS
- Control unit
- Bosch MED17.0.1
- Read type
- Calibration only (data set)
- File
- 256.00 KB · Flash
- Hardware number
- HT11-14C204-BE
- Software number
- 016471
- Bosch part / software
- 10SW016471
- Vehicle maker's hardware number
- HT11-12A650-BE
Technical data
| Brand | Ford |
|---|---|
| Car model | Tourneo |
| Engine | 1.0 100PS |
| Fuel | Petrol |
| Control unit | Bosch MED17.0.1 |
|---|---|
| ECU maker | Bosch |
| Hardware number | HT11-14C204-BE |
| Software number | 016471 |
| File type | Original flash read |
|---|---|
| File size | 256.00 KB (262,144 bytes) |
| File key | c7e677f9fe4ee494 |
| ECU name | MED17.0.1 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW016471 | Offset in the file: 0x00001A |
| Vehicle maker's hardware number | HT11-12A650-BE | Offset in the file: 0x027AF2 |
| Software / calibration | HT11-14C204-BE | Offset in the file: 0x027ACE |
| Bosch project identifier (EPK) | 56/1/MED17/2/FOXGTDI//D1701_008_142G_1401/160714/103529/ | Offset in the file: 0x03FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.0.1 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number HT11-14C204-BE and software number 016471. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.0.1
| Hardware | Software | Vehicles |
|---|---|---|
| HA6A-12B684-NA | 10SW036930 | Ford EcoSport |
| HN15-14C204-AC | 10SW008993 | Ford EcoSport |
| HN15-14C204-EC | 10SW010056 | Ford EcoSport |
| HT11-14C204-BD | 10SW009590 | Ford Tourneo, Ford Transit Courier |
| HT11-14C204-BE | 10SW016471 | Ford Tourneo, Ford Fiesta, Ford Tourneo Courier |
| HT11-14C204-BE | HT11-12A650-BE | Ford Transit Courier |
| HV6A-12A650-EB | 1349006270 | Ford Tourneo |
| HV6A-12A650-XA | Ford Tourneo |