Original file
Ford B-Max Bosch MED17.0.1 HY11-14C204-CD / HY11-14C204-CD
An original (stock) flash read of the Bosch MED17.0.1 control unit, fitted in Ford B-Max, hardware number HY11-14C204-CD and software number HY11-14C204-CD, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Ford B-Max1.0 · 100.0PS / 73.5kW
- Control unit
- Bosch MED17.0.1
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- HY11-14C204-CD
- Software number
- HY11-14C204-CD
- Bosch part / software
- 10SW016022
- Vehicle maker's hardware number
- HY11-12A650-CD
Technical data
| Brand | Ford |
|---|---|
| Car model | B-Max |
| Engine | 1.0 |
| Fuel | Petrol |
| Power | 100.0PS / 73.5kW |
| Control unit | Bosch MED17.0.1 |
|---|---|
| ECU maker | Bosch |
| Hardware number | HY11-14C204-CD |
| Software number | HY11-14C204-CD |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 0c4ca38e2d078fb8 |
| ECU name | MED17.0.1 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW016022 | Offset in the file: 0x04001A |
| Vehicle maker's hardware number | HY11-12A650-CD | Offset in the file: 0x067AF2 |
| Software / calibration | HY11-14C204-CD | Offset in the file: 0x000000 |
| Bosch project identifier (EPK) | 56/1/MED17/2/FOXGTDI//D1701_008_142G_1401/160714/103529/ | Offset in the file: 0x07FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.0.1 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number HY11-14C204-CD and software number HY11-14C204-CD. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.0.1
| Hardware | Software | Vehicles |
|---|---|---|
| HT11-14C204-BE | 10SW016471 | Ford Tourneo, Ford Fiesta, Ford Tourneo Courier |
| HT11-14C204-BE | HT11-12A650-BE | Ford Transit Courier |
| HV6A-12A650-EB | 1349006270 | Ford Tourneo |
| HV6A-12A650-XA | Ford Tourneo | |
| HY11-14C204-DC | 10SW009796 | Ford |
| HY11-14C204-GC | 10SW009794 | Ford Focus |
| HY11-14C204-GD | 10SW003306 | Ford B-Max |
| HY11-14C204-GD | 10SW014887 | Ford Focus, Ford B-Max, Ford B MAX |