Original file
Ford Focus Bosch MED17.0.1 HY11-14C204-GC / 10SW009794
An original (stock) flash read of the Bosch MED17.0.1 control unit, fitted in Ford Focus, hardware number HY11-14C204-GC and software number 10SW009794, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Ford Focus125PS
- Control unit
- Bosch MED17.0.1
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- HY11-14C204-GC
- Software number
- 10SW009794
- Vehicle maker's hardware number
- HY11-12A650-GC
Technical data
| Brand | Ford |
|---|---|
| Car model | Focus |
| Engine | 125PS |
| Fuel | Petrol |
| Displacement | 1.0 |
| Power | 125.0PS / 91.9kW |
| Control unit | Bosch MED17.0.1 |
|---|---|
| ECU maker | Bosch |
| Hardware number | HY11-14C204-GC |
| Software number | 10SW009794 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | bb22b196279a17d3 |
| ECU name | MED17.0.1 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW009794 | Offset in the file: 0x04001A |
| Vehicle maker's hardware number | HY11-12A650-GC | Offset in the file: 0x067B2A |
| Software / calibration | HY11-14C204-GC | Offset in the file: 0x067B06 |
| Bosch project identifier (EPK) | 56/1/MED17/2/FOXGTDI//D1701_002_142G_1401/160714/103346/ | Offset in the file: 0x07FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.0.1 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number HY11-14C204-GC and software number 10SW009794. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.0.1
| Hardware | Software | Vehicles |
|---|---|---|
| HV6A-12A650-EB | 1349006270 | Ford Tourneo |
| HV6A-12A650-XA | Ford Tourneo | |
| HY11-14C204-CD | HY11-14C204-CD | Ford B-Max |
| HY11-14C204-DC | 10SW009796 | Ford |
| HY11-14C204-GD | 10SW003306 | Ford B-Max |
| HY11-14C204-GD | 10SW014887 | Ford Focus, Ford B-Max, Ford B MAX |
| JT71-14C204-LF | E1BA-12B684-CA | Ford |
| JT71-14C204-LF | JT71-14C204-LF | Ford Transit |