Original file

Ford B MAX Bosch MED17.0.1 HY11-14C204-GD / 10SW014887

An original (stock) flash read of the Bosch MED17.0.1 control unit, fitted in Ford B MAX, hardware number HY11-14C204-GD and software number 10SW014887, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford B MAX1.0 125PS
Control unit
Bosch MED17.0.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
HY11-14C204-GD
Software number
10SW014887
Vehicle maker's hardware number
HY11-12A650-GD
Software / calibration
CV6A-12B684-BD

Technical data

Vehicle
BrandFord
Car modelB MAX
Engine1.0 125PS
FuelPetrol
Power125.0PS / 91.9kW
Control unit
Control unitBosch MED17.0.1
ECU makerBosch
Hardware numberHY11-14C204-GD
Software number10SW014887
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc076134ef1fb4dcb
Identification read from the file
ECU nameMED17.0.1
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software10SW014887Offset in the file: 0x08001A
Vehicle maker's hardware numberHY11-12A650-GDOffset in the file: 0x00FC30
Software / calibrationCV6A-12B684-BDOffset in the file: 0x00FC00
Engine descriptionHY11-14C204-GDOffset in the file: 0x067B06
Bosch project identifier (EPK)56/1/MED17/2/FOXGTDI//D1701_002_142G_1401/160714/103346/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number HY11-14C204-GD and software number 10SW014887. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Ford B-MaxFlash2,048.00 KB€15Add to cart
Ford FocusFlash2,048.00 KB€15Add to cart

All reads of HY11-14C204-GD / 10SW014887

Other pairs of Bosch MED17.0.1

HardwareSoftwareVehicles
HY11-14C204-CDHY11-14C204-CDFord B-Max
HY11-14C204-DC10SW009796Ford
HY11-14C204-GC10SW009794Ford Focus
HY11-14C204-GD10SW003306Ford B-Max
JT71-14C204-LFE1BA-12B684-CAFord
JT71-14C204-LFJT71-14C204-LFFord Transit
JT71-14C204-MF10SW039038Ford Tourneo, Ford Tourneo Courier
JT71-14C204-MFJT71-14C204-MFFord Tourneo Connect, Ford Tourneo

Bosch MED17.0.1 original files

The Bosch MED17.0.1 unit page