Original file

Ford Tourneo Connect Bosch MED17.0.1 JT71-14C204-MF / JT71-14C204-MF

An original (stock) flash read of the Bosch MED17.0.1 control unit, fitted in Ford Tourneo Connect, hardware number JT71-14C204-MF and software number JT71-14C204-MF, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Tourneo Connect1.0 100PS
Control unit
Bosch MED17.0.1
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
JT71-14C204-MF
Software number
JT71-14C204-MF
Bosch part / software
10SW039038
Vehicle maker's hardware number
JT71-12A650-MF

Technical data

Vehicle
BrandFord
Car modelTourneo Connect
Engine1.0 100PS
FuelPetrol
Control unit
Control unitBosch MED17.0.1
ECU makerBosch
Hardware numberJT71-14C204-MF
Software numberJT71-14C204-MF
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key52b4f3101e73a76d
Identification read from the file
ECU nameMED17.0.1
Read typeCalibration only (data set)
Bosch part / software10SW039038Offset in the file: 0x04001A
Vehicle maker's hardware numberJT71-12A650-MFOffset in the file: 0x06A4F2
Software / calibrationJT71-14C204-MFOffset in the file: 0x06A4CE
Bosch project identifier (EPK)56/1/MED17/2/FOXGTDI//D1701_015_142H_0600/010318/121334/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number JT71-14C204-MF and software number JT71-14C204-MF. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Ford TourneoFlash256.00 KB€15Add to cart

All reads of JT71-14C204-MF / JT71-14C204-MF

Other pairs of Bosch MED17.0.1

HardwareSoftwareVehicles
HY11-14C204-GC10SW009794Ford Focus
HY11-14C204-GD10SW003306Ford B-Max
HY11-14C204-GD10SW014887Ford Focus, Ford B-Max, Ford B MAX
JT71-14C204-LFE1BA-12B684-CAFord
JT71-14C204-LFJT71-14C204-LFFord Transit
JT71-14C204-MF10SW039038Ford Tourneo, Ford Tourneo Courier
LT71-14C204-ABLT71-14C204-ABFord Transit Courier
MED170_PBL_67_T3_DG506_1Ford Focus

Bosch MED17.0.1 original files

The Bosch MED17.0.1 unit page