Original file

Ford Transit Courier Bosch MED17.0.1 LT71-14C204-AB / LT71-14C204-AB

An original (stock) flash read of the Bosch MED17.0.1 control unit, fitted in Ford Transit Courier, hardware number LT71-14C204-AB and software number LT71-14C204-AB, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Transit Courier1.0 · 100.0PS / 73.5kW
Control unit
Bosch MED17.0.1
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
LT71-14C204-AB
Software number
LT71-14C204-AB
Bosch part / software
10SW062668
Vehicle maker's hardware number
LT71-12A650-AB

Technical data

Vehicle
BrandFord
Car modelTransit Courier
Engine1.0
FuelPetrol
Power100.0PS / 73.5kW
Control unit
Control unitBosch MED17.0.1
ECU makerBosch
Hardware numberLT71-14C204-AB
Software numberLT71-14C204-AB
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyba3dbf8c5a9c4d26
Identification read from the file
ECU nameMED17.0.1
Read typeCalibration only (data set)
Bosch part / software10SW062668Offset in the file: 0x04001A
Vehicle maker's hardware numberLT71-12A650-ABOffset in the file: 0x06A4F2
Software / calibrationLT71-14C204-ABOffset in the file: 0x000000
Bosch project identifier (EPK)56/1/MED17/2/FOXGTDI//D1701_015_142H_0600/010318/121334/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number LT71-14C204-AB and software number LT71-14C204-AB. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0.1

HardwareSoftwareVehicles
HY11-14C204-GC10SW009794Ford Focus
HY11-14C204-GD10SW003306Ford B-Max
HY11-14C204-GD10SW014887Ford Focus, Ford B-Max, Ford B MAX
JT71-14C204-LFE1BA-12B684-CAFord
JT71-14C204-LFJT71-14C204-LFFord Transit
JT71-14C204-MF10SW039038Ford Tourneo, Ford Tourneo Courier
JT71-14C204-MFJT71-14C204-MFFord Tourneo Connect, Ford Tourneo
MED170_PBL_67_T3_DG506_1Ford Focus

Bosch MED17.0.1 original files

The Bosch MED17.0.1 unit page