Original file

Ford Mondeo Bosch MED17.0 BG91-14C204-BMA / 10SW043073

An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Ford Mondeo, hardware number BG91-14C204-BMA and software number 10SW043073, 256.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Mondeo2.0 · 160.0PS / 117.7kW
Control unit
Bosch MED17.0
Read type
Calibration only (data set)
File
256.00 KB · Flash
Hardware number
BG91-14C204-BMA
Software number
10SW043073
Vehicle maker's hardware number
BG91-12A650-BMA

Technical data

Vehicle
BrandFord
Car modelMondeo
Engine2.0
FuelPetrol
Power160.0PS / 117.7kW
Control unit
Control unitBosch MED17.0
ECU makerBosch
Hardware numberBG91-14C204-BMA
Software number10SW043073
File
File typeOriginal flash read
File size256.00 KB (262,144 bytes)
File key7d4c894d3abca48e
Identification read from the file
ECU nameMED17.0
Read typeCalibration only (data set)
Bosch part / software10SW043073Offset in the file: 0x00001A
Vehicle maker's hardware numberBG91-12A650-BMAOffset in the file: 0x025076
Software / calibrationBG91-14C204-BMAOffset in the file: 0x025063
Bosch project identifier (EPK)58/1/MED17/2/SIG16GGA//D170_02D_106A2_0D023/150618/135746/Offset in the file: 0x03FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number BG91-14C204-BMA and software number 10SW043073. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0

HardwareSoftwareVehicles
BG91-14C204-BHA1037539028Ford S-Max, Ford Mondeo
BG91-14C204-BHB1037547655Ford S-Max
BG91-14C204-BJA1037539031Ford Mondeo, Ford Focus
BG91-14C204-BKA10SW043088Ford S-Max
BG91-14C204-BPA10SW043123Ford Mondeo
BG91-14C204-EE1037515742Ford Mondeo
BG91-14C204-EF1037516478Ford Mondeo
BG91-14C204-JD1037513774Ford Galaxy

Bosch MED17.0 original files

The Bosch MED17.0 unit page