Original file
Land Rover Range Rover Evoque Bosch MED17.0 BJ32-14C204-MBY / BJ32-14C204-MBY
An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Land Rover Range Rover Evoque, hardware number BJ32-14C204-MBY and software number BJ32-14C204-MBY, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Land Rover Range Rover Evoque2.0 · 237.0PS / 174.3kW
- Control unit
- Bosch MED17.0
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- BJ32-14C204-MBY
- Software number
- BJ32-14C204-MBY
- Bosch part / software
- 10SW011952
- Vehicle maker's hardware number
- BJ32-12A650-MBY
Technical data
| Brand | Land Rover |
|---|---|
| Car model | Range Rover Evoque |
| Engine | 2.0 |
| Fuel | Petrol |
| Power | 237.0PS / 174.3kW |
| Control unit | Bosch MED17.0 |
|---|---|
| ECU maker | Bosch |
| Hardware number | BJ32-14C204-MBY |
| Software number | BJ32-14C204-MBY |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 36373300e8cdb8ea |
| ECU name | MED17.0 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW011952 | Offset in the file: 0x04001A |
| Vehicle maker's hardware number | BJ32-12A650-MBY | Offset in the file: 0x061F2E |
| Software / calibration | BJ32-14C204-MBY | Offset in the file: 0x061F0A |
| Bosch project identifier (EPK) | 54/1/MED17/2/I420GMO//D170_200_111_0882/110416/145915/ | Offset in the file: 0x07FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number BJ32-14C204-MBY and software number BJ32-14C204-MBY. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other reads of this pair
The same hardware and software numbers, read from other vehicles or at other times; each has its page.
| Vehicles | Size | Price | Add to cart |
|---|---|---|---|
| Land Rover Range Rover Evoque | 2,048.00 KB | €15 | Add to cart |
Other pairs of Bosch MED17.0
| Hardware | Software | Vehicles |
|---|---|---|
| BJ32-14C204-MBX | 10SW000106 | Land Rover Range Rover Evoque |
| BJ32-14C204-MBX | BJ32-14C204-MBX | Land Rover Range Rover Evoque |
| BJ32-14C204-MBY | 1037517034 | Land Rover Range Rover Evoque |
| BJ32-14C204-MBY | 10SW011952 | Land Rover Evoque, Land Rover Range Rover Evoque |
| BJ32-14C204-MCM | 1037522258 | Land Rover Evoque |
| BJ32-14C204-MCT | 1037517034 | Land Rover Range Rover Evoque |
| BJ32-14C204-MCU | 1037517034 | Land Rover Range Rover Evoque |
| BJ32-14C204-MCU | 10SW000105 | Land Rover Range Rover Evoque |