Original file

Ford Bosch MED17.0 BV61-14C204-CUC / 10SW001477

An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Ford, hardware number BV61-14C204-CUC and software number 10SW001477, 256.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford
Control unit
Bosch MED17.0
Read type
Calibration only (data set)
File
256.00 KB · Flash
Hardware number
BV61-14C204-CUC
Software number
10SW001477
Vehicle maker's hardware number
BV61-12A650-CUC

Technical data

Vehicle
BrandFord
Control unit
Control unitBosch MED17.0
ECU makerBosch
Hardware numberBV61-14C204-CUC
Software number10SW001477
File
File typeOriginal flash read
File size256.00 KB (262,144 bytes)
File key3068841668600fdb
Identification read from the file
ECU nameMED17.0
Read typeCalibration only (data set)
Bosch part / software10SW001477Offset in the file: 0x00001A
Vehicle maker's hardware numberBV61-12A650-CUCOffset in the file: 0x0247AE
Software / calibrationBV61-14C204-CUCOffset in the file: 0x02479B
Bosch project identifier (EPK)56/1/MED17/2/SIG16GGA//D170_06D_106A_0D06/030415/111836/Offset in the file: 0x03FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number BV61-14C204-CUC and software number 10SW001477. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0

HardwareSoftwareVehicles
BV61-14C204-CEB1037522388Ford C-MAX
BV61-14C204-CTA1037523893Ford C-Max
BV61-14C204-CUA1037523832Ford C-Max 1.6T, Ford c max T 2012, Ford Focus
BV61-14C204-CUB1037535905Ford T 18 09 2013
BV61-14C204-CXB1037535903Ford Focus
BV61-14C204-CXC10SW001583Ford Focus
BV61-14C204-CYB1037535910Ford Focus
BV61-14C204-DYA1037537966Ford Focus

Bosch MED17.0 original files

The Bosch MED17.0 unit page