Original file

Volvo XC 60 Bosch MED17.0 CG9N-14C204-DAC / 1037506930

An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Volvo XC 60, hardware number CG9N-14C204-DAC and software number 1037506930, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volvo XC 602.0 petrol 240PS
Control unit
Bosch MED17.0
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
CG9N-14C204-DAC
Software number
1037506930
Bosch part / software
1037543565
Software / calibration
31431588 AA

Technical data

Vehicle
BrandVolvo
Car modelXC 60
Engine2.0 petrol 240PS
Power240.0PS / 176.5kW
Control unit
Control unitBosch MED17.0
ECU makerBosch
Hardware numberCG9N-14C204-DAC
Software number1037506930
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc3ae9530e48c4224
Identification read from the file
ECU nameMED17.0
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037543565Offset in the file: 0x08001A
Software / calibration31431588 AAOffset in the file: 0x0631F3
Boot software31312683 AAOffset in the file: 0x00FC18
Internal build stringMED170_PBL_67_T0_DG502_0Offset in the file: 0x00FA58
Bosch project identifier (EPK)55/1/MED17/2/I420GMO//D170_320_9CU1_0N43/060212/221908/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CG9N-14C204-DAC and software number 1037506930. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0

HardwareSoftwareVehicles
BV61-14C204-ZC1037515463Ford Focus 2011 133.9KWKW, Ford Focus
CG91-14C204-AF1037521365Ford Mondeo
CG91-14C204-AH1037538258Ford Mondeo
CG9N-14C204-BAA1037524380Volvo
CH52-14C204-MBF1037539888Land Rover Freelander
CM5A-12A650-AMGFord Focus
CM5A-12A650-ARCFord Focus ST
CM5A-12A650-ARFFord Focus

Bosch MED17.0 original files

The Bosch MED17.0 unit page