Original file

Jaguar xf 2.0T Bosch MED17.0 CX23-14C204-MCH / 10SW039470

An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Jaguar xf 2.0T, hardware number CX23-14C204-MCH and software number 10SW039470, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar xf 2.0T2.0
Control unit
Bosch MED17.0
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CX23-14C204-MCH
Software number
10SW039470
Vehicle maker's hardware number
CX23-12A650-MCH

Technical data

Vehicle
BrandJaguar
Car modelxf 2.0T
Engine2.0
Control unit
Control unitBosch MED17.0
ECU makerBosch
Hardware numberCX23-14C204-MCH
Software number10SW039470
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameJaguar xf
File keyd2aa065dbafb435d
Identification read from the file
ECU nameMED17.0
Read typeCalibration only (data set)
Bosch part / software10SW039470Offset in the file: 0x04001A
Vehicle maker's hardware numberCX23-12A650-MCHOffset in the file: 0x06AA96
Software / calibrationCX23-14C204-MCHOffset in the file: 0x06AA72
Bosch project identifier (EPK)54/1/MED17/2/I420GMO//D170_210_X23_0550/051214/164011/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CX23-14C204-MCH and software number 10SW039470. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0

Bosch MED17.0 original files

The Bosch MED17.0 unit page