Original file

Land Rover Range Rover Evoque 2.0 Si4 Bosch MED17.0 DH52-14C204-MBK / 1037517034

An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Land Rover Range Rover Evoque 2.0 Si4, hardware number DH52-14C204-MBK and software number 1037517034, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover Evoque 2.0 Si42.0 petrol 241PS
Control unit
Bosch MED17.0
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
DH52-14C204-MBK
Software number
1037517034
Bosch part / software
10SW011956
Vehicle maker's hardware number
DH52-12A650-MBK
Software / calibration
BJ32-12B684-MA

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover Evoque 2.0 Si4
Engine2.0 petrol 241PS
Control unit
Control unitBosch MED17.0
ECU makerBosch
Hardware numberDH52-14C204-MBK
Software number1037517034
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7c6324f5834f1d96
Identification read from the file
ECU nameMED17.0
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software10SW011956Offset in the file: 0x08001A
Vehicle maker's hardware numberDH52-12A650-MBKOffset in the file: 0x061F2E
Software / calibrationBJ32-12B684-MAOffset in the file: 0x00FC00
Engine descriptionDH52-14C204-MBKOffset in the file: 0x061F0A
Internal build stringMED170_PBL_67_200_0700Offset in the file: 0x00FA58
Bosch project identifier (EPK)54/1/MED17/2/I420GMO//D170_200_111_0882/110416/145915/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number DH52-14C204-MBK and software number 1037517034. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0

HardwareSoftwareVehicles
DG9A-12B684-XB10SW005617Ford S-Max
DG9N-14C204-AAC1037518907Volvo S60 / V60, Volvo S60
DG9N-14C204-BAC1037506930Volvo XC 60, Volvo XC60
DH52-14C204-MBJLand Rover Freelander
DL3A-14C558-AA1037550873Ford Focus 3 RS 2016y
EG9N-14C204-IAB1037518907Volvo V70
EG9N-14C204-IAB1037544388Volvo V40
EG9N-14C204-IAD1037518907Volvo V40, Volvo S40 / V40

Bosch MED17.0 original files

The Bosch MED17.0 unit page