Original file

Volvo V70 Bosch MED17.0 EG9N-14C204-IAB / 1037518907

An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Volvo V70, hardware number EG9N-14C204-IAB and software number 1037518907, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volvo V701.6 petrol 180PS
Control unit
Bosch MED17.0
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
EG9N-14C204-IAB
Software number
1037518907
Bosch part / software
1037544388
Software / calibration
31411844 AA

Technical data

Vehicle
BrandVolvo
Car modelV70
Engine1.6 petrol 180PS
Power180.0PS / 132.4kW
Control unit
Control unitBosch MED17.0
ECU makerBosch
Hardware numberEG9N-14C204-IAB
Software number1037518907
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7337d46ccecf0c2d
Identification read from the file
ECU nameMED17.0
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037544388Offset in the file: 0x08001A
Software / calibration31411844 AAOffset in the file: 0x06A58D
Boot software31312578 ABOffset in the file: 0x00FC18
Internal build stringMED170_PBL_67_T0_DG502_0Offset in the file: 0x00FA58
Bosch project identifier (EPK)58/1/MED17/19/SIG16GGA//D170_421_SPM23_0V70/190314/175756/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number EG9N-14C204-IAB and software number 1037518907. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0

HardwareSoftwareVehicles
DG9N-14C204-BAC1037506930Volvo XC 60, Volvo XC60
DH52-14C204-MBJLand Rover Freelander
DH52-14C204-MBK1037517034Land Rover Range Rover Evoque 2.0 Si4
DL3A-14C558-AA1037550873Ford Focus 3 RS 2016y
EG9N-14C204-IAB1037544388Volvo V40
EG9N-14C204-IAD1037518907Volvo V40, Volvo S40 / V40
EG9N-14C204-IAD1037555247Volvo V40
HM51-12A650-MB1037535451Ford FOCUS 3 2.0i

Bosch MED17.0 original files

The Bosch MED17.0 unit page