Original file

Ford FOCUS 3 2.0i Bosch MED17.0 HM51-12A650-MB / 1037535451

An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Ford FOCUS 3 2.0i, hardware number HM51-12A650-MB and software number 1037535451, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford FOCUS 3 2.0i2.0
Control unit
Bosch MED17.0
Read type
Full read (boot area included)
File
2,048.00 KB · Flash with its EEPROM
Hardware number
HM51-12A650-MB
Software number
1037535451
Software / calibration
BV61-12B684-BA

Technical data

Vehicle
BrandFord
Car modelFOCUS 3 2.0i
Engine2.0
Control unit
Control unitBosch MED17.0
ECU makerBosch
Hardware numberHM51-12A650-MB
Software number1037535451
File
File typeOriginal flash read with its EEPROM
File size2,048.00 KB (2,097,152 bytes)
From the file nameFORD FOCUS MB
File keyc981b3d1ca353761
Identification read from the file
ECU nameMED17.0
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037535451Offset in the file: 0x00401A
Vehicle maker's hardware numberHM51-12A650-MBOffset in the file: 0x00FC30
Software / calibrationBV61-12B684-BAOffset in the file: 0x00FC00
Engine descriptionHM51-14C204-MBOffset in the file: 0x1FFF4B
Internal build stringMED170_PBL_67_T0_DG500_0Offset in the file: 0x00FA58
Bosch project identifier (EPK)43/1/MED17/22/MEDECM//D170_010_F3BC/Dst00//Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number HM51-12A650-MB and software number 1037535451. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0

HardwareSoftwareVehicles
DH52-14C204-MBJLand Rover Freelander
DH52-14C204-MBK1037517034Land Rover Range Rover Evoque 2.0 Si4
DL3A-14C558-AA1037550873Ford Focus 3 RS 2016y
EG9N-14C204-IAB1037518907Volvo V70
EG9N-14C204-IAB1037544388Volvo V40
EG9N-14C204-IAD1037518907Volvo V40, Volvo S40 / V40
EG9N-14C204-IAD1037555247Volvo V40
MED170_PBL_67_T0_DG502_01037518907Volvo V40

Bosch MED17.0 original files

The Bosch MED17.0 unit page