Original file

Audi RSQ3 Bosch MED17.1.1 0261S09192 / 8U0907404A

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi RSQ3, hardware number 0261S09192 and software number 8U0907404A, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi RSQ32.5 petrol 310PS
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0261S09192
Software number
8U0907404A
Bosch part / software
10SW007126

Technical data

Vehicle
BrandAudi
Car modelRSQ3
Engine2.5 petrol 310PS
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number0261S09192
Software number8U0907404A
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyb0b991d2a39736db
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
Bosch part / software0261S09192 / 10SW007126Offset in the file: 0x1B0B78 / 0x02001A
Vehicle maker's hardware number8U0907404AOffset in the file: 0x1B0B8E
Software / calibration8U0907404A · version 0005Offset in the file: 0x1B0B9A
Bosch project identifier (EPK)51/1/MED17/5/MED17.1.1//D1711A12C000_MY14E0/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S09192 and software number 8U0907404A. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
0261S09192007126Audi RSQ3 2.5 TFSI
0261S091921037539078Audi RS, Audi Q3 RS, Audi RS 2.5 TFSI
0261S091921037540398Audi RS, Audi Q3 RS, Audi RS3
0261S0919210SW007126Audi RS
0799073091037533313Bentley Continental TM CHIPTUNING 4.0 TFSI, Bentley Continental GTC, Bentley Continental GTS
0799073091037534264Bentley Continental
0799073091037539270Bentley Continental, Bentley Continental GT 4.0L
07K907309C003879Audi RS3 2.5 TFSI

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page