Original file

Bentley Continental Bosch MED17.1.1 079907309 / 1037534264

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Bentley Continental, hardware number 079907309 and software number 1037534264, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Bentley Continental4.0 · 500.0PS / 367.7kW
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
079907309
Software number
1037534264
Software / calibration
4W0906560

Technical data

Vehicle
BrandBentley
Car modelContinental
Engine4.0
FuelPetrol
Power500.0PS / 367.7kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number079907309
Software number1037534264
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key01b052f20a36e9c8
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037534264Offset in the file: 0x02001A
Vehicle maker's hardware number079907309Offset in the file: 0x3D5D80
Software / calibration4W0906560 · version 0002Offset in the file: 0x3D5D9A
Internal build stringMED17 CB.05.04.00Offset in the file: 0x00EA36
Bosch project identifier (EPK)51/1/MED17/5/MED17.1.1//D1711A09C000_MY14C6/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 079907309 and software number 1037534264. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Bentley ContinentalFlash2,048.00 KB€15Add to cart

All reads of 079907309 / 1037534264

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
0261S091921037540398Audi RS, Audi Q3 RS, Audi RS3
0261S0919210SW007126Audi RS
0261S091928U0907404AAudi RSQ3
0799073091037533313Bentley Continental TM CHIPTUNING 4.0 TFSI, Bentley Continental GTC, Bentley Continental GTS
0799073091037539270Bentley Continental, Bentley Continental GT 4.0L
07K907309C003879Audi RS3 2.5 TFSI
07K907309C008134Audi RS3 2.5 TFSI, Audi RS3 Sportback 2.5 TFSI quattro 7AT - 400hp
07K907309C016368Audi RS3 2.5 TFSI, Audi RS3 2.5 TSI/TFSI

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page