Original file

Audi RS3 Sportback 2.5 TFSI Bosch MED17.1.1 07K907309C / 036436

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi RS3 Sportback 2.5 TFSI, hardware number 07K907309C and software number 036436, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi RS3 Sportback 2.5 TFSI2.5 petrol 365.6PS / 268.9kW
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
07K907309C
Software number
036436
Bosch part / software
10SW036436
Software / calibration
8V0907404

Technical data

Vehicle
BrandAudi
Car modelRS3 Sportback 2.5 TFSI
Engine2.5 petrol 365.6PS / 268.9kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number07K907309C
Software number036436
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key80eac834662842fc
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
Bosch part / software10SW036436Offset in the file: 0x02001A
Vehicle maker's hardware number07K907309COffset in the file: 0x3B6A8A
Software / calibration8V0907404 · version 0007Offset in the file: 0x3B6AA4
Bosch project identifier (EPK)37/1/MED17/5///D1711A13C000_MY15H2///Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07K907309C and software number 036436. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
0799073091037539270Bentley Continental, Bentley Continental GT 4.0L
07K907309C003879Audi RS3 2.5 TFSI
07K907309C008134Audi RS3 2.5 TFSI, Audi RS3 Sportback 2.5 TFSI quattro 7AT - 400hp
07K907309C016368Audi RS3 2.5 TFSI, Audi RS3 2.5 TSI/TFSI
07K907309C07K907309CAudi RS3
07K907309C1037541810Audi RS3, Audi RS3 Sportback
07K907309C1037550483Audi RS3
07K907309C1037553587Audi RS3, Audi RS3 2.5 TFSI, Audi RS3 2.5 TSI/TFSI

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page