Original file

Audi RS3 Bosch MED17.1.1 07K907309C / 8V0907404

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi RS3, hardware number 07K907309C and software number 8V0907404, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi RS32.5 petrol 367PS
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
07K907309C
Software number
8V0907404
Bosch part / software
10SW036436

Technical data

Vehicle
BrandAudi
Car modelRS3
Engine2.5 petrol 367PS
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number07K907309C
Software number8V0907404
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyccbd7c075c7406a7
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
Bosch part / software10SW036436Offset in the file: 0x02001A
Vehicle maker's hardware number07K907309COffset in the file: 0x3B6A8A
Software / calibration8V0907404 · version 0007Offset in the file: 0x3B6AA4
Bosch project identifier (EPK)37/1/MED17/5///D1711A13C000_MY15H2///Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07K907309C and software number 8V0907404. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi RS3Flash4,096.00 KB€15Add to cart
Audi RS3Flash4,096.00 KB€15Add to cart
Audi RS3Flash4,096.00 KB€15Add to cart
Audi RS3Flash4,096.00 KB€15Add to cart
Audi RS3Flash4,096.00 KB€15Add to cart
Audi RS3Flash4,096.00 KB€15Add to cart

All reads of 07K907309C / 8V0907404

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
07K907309C10SW008134Audi RS3
07K907309C10SW016368Audi RS3, Audi RS3 2.5 TFSI
07K907309C10SW036436Audi RS3
07K907309C6577688667Audi RS3
07K907309D003874Audi Q3 RS 2.5 TFSI, Audi RS3 2.5 TFSI, Audi RSQ3 2.5 TFSI
07K907309D016370Audi Q3 RS 2.5 TFSI quattro 7AT - 310hp
07K907309D016375Audi RSQ3 2.5 TFSI
07K907309D07K907309DAudi RSQ3, Audi Q3 RS

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page