Original file

Audi Q3 RS 2.5 TFSI quattro 7AT - 310hp Bosch MED17.1.1 07K907309D / 016370

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi Q3 RS 2.5 TFSI quattro 7AT - 310hp, hardware number 07K907309D and software number 016370, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q3 RS 2.5 TFSI quattro 7AT - 310hp2.5 petrol 310HP
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
07K907309D
Software number
016370
Bosch part / software
10SW016370
Software / calibration
8U0907404B

Technical data

Vehicle
BrandAudi
Car modelQ3 RS 2.5 TFSI quattro 7AT - 310hp
Engine2.5 petrol 310HP
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number07K907309D
Software number016370
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key91044f5bd40af492
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
Bosch part / software10SW016370Offset in the file: 0x02001A
Vehicle maker's hardware number07K907309DOffset in the file: 0x3B5762
Software / calibration8U0907404B · version 0006Offset in the file: 0x3B577C
Bosch project identifier (EPK)37/1/MED17/5///D1711A12C000_MY15H0///Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07K907309D and software number 016370. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
07K907309C10SW036436Audi RS3
07K907309C6577688667Audi RS3
07K907309C8V0907404Audi RS3
07K907309D003874Audi Q3 RS 2.5 TFSI, Audi RS3 2.5 TFSI, Audi RSQ3 2.5 TFSI
07K907309D016375Audi RSQ3 2.5 TFSI
07K907309D07K907309DAudi RSQ3, Audi Q3 RS
07K907309D1037541808Audi RSQ3, Audi Q3 RS, Audi RSQ3 -
07K907309D10SW016370Audi RS Q3

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page