Original file

Audi Bosch MED17.1.1 07K907309D / 10SW016375

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi, hardware number 07K907309D and software number 10SW016375, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi2.5 diesel
Control unit
Bosch MED17.1.1
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
07K907309D
Software number
10SW016375
Software / calibration
8U0907404C

Technical data

Vehicle
BrandAudi
Engine2.5 diesel
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number07K907309D
Software number10SW016375
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key7765441703b6940f
Identification read from the file
ECU nameMED17.1.1
Read typeCalibration only (data set)
Bosch part / software10SW016375Offset in the file: 0x38001A
Vehicle maker's hardware number07K907309DOffset in the file: 0x3B5762
Software / calibration8U0907404C · version 0003Offset in the file: 0x3B577C
Bosch project identifier (EPK)37/1/MED17/5///D1711A12C000_MY15H0///Offset in the file: 0x3FBF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07K907309D and software number 10SW016375. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi RS Q3Flash4,096.00 KB€15Add to cart

All reads of 07K907309D / 10SW016375

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
07K907309D016375Audi RSQ3 2.5 TFSI
07K907309D07K907309DAudi RSQ3, Audi Q3 RS
07K907309D1037541808Audi RSQ3, Audi Q3 RS, Audi RSQ3 -
07K907309D10SW016370Audi RS Q3
07K907309D10SW036693Audi
07K907309D8U0907404BAudi RSQ3
3W0906560A1037533116Bentley Continental GT, Bentley GT
3W0906560B1037533322Bentley GT

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page