Original file

Audi Bosch MED17.1.1 07K907309D / 10SW036693

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi, hardware number 07K907309D and software number 10SW036693, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audipetrol
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
07K907309D
Software number
10SW036693
Software / calibration
8U0907404C

Technical data

Vehicle
BrandAudi
Enginepetrol
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number07K907309D
Software number10SW036693
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key90736113719d0d4f
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
Bosch part / software10SW036693Offset in the file: 0x02001A
Vehicle maker's hardware number07K907309DOffset in the file: 0x3B574A
Software / calibration8U0907404C · version 0004Offset in the file: 0x3B5764
Internal build stringMED17 CB.05.04.00Offset in the file: 0x00EA36
Bosch project identifier (EPK)37/1/MED17/5///D1711A12C000_MY15H2///Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07K907309D and software number 10SW036693. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
07K907309D07K907309DAudi RSQ3, Audi Q3 RS
07K907309D1037541808Audi RSQ3, Audi Q3 RS, Audi RSQ3 -
07K907309D10SW016370Audi RS Q3
07K907309D10SW016375Audi RS Q3
07K907309D8U0907404BAudi RSQ3
3W0906560A1037533116Bentley Continental GT, Bentley GT
3W0906560B1037533322Bentley GT
3W0906560C1037540352Bentley Continental, Bentley GT

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page