Original file

Bentley Bosch MED17.1.1 3W0906560D / 1037540417

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Bentley, hardware number 3W0906560D and software number 1037540417, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Bentley4.0 petrol
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
3W0906560D
Software number
1037540417
Vehicle maker's hardware number
079907309

Technical data

Vehicle
BrandBentley
Car modelBentley
Engine4.0 petrol
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number3W0906560D
Software number1037540417
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyce9f9b39259496d4
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
Bosch part / software1037540417Offset in the file: 0x02001A
Vehicle maker's hardware number079907309Offset in the file: 0x3D5D80
Software / calibration3W0906560D · version 0001Offset in the file: 0x3D5D9A
Internal build stringMED17 CB.05.04.00Offset in the file: 0x00EA36
Bosch project identifier (EPK)51/1/MED17/5/MED17.1.1//D1711A09C000_MY14C6/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 3W0906560D and software number 1037540417. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
07K907309D8U0907404BAudi RSQ3
3W0906560A1037533116Bentley Continental GT, Bentley GT
3W0906560B1037533322Bentley GT
3W0906560C1037540352Bentley Continental, Bentley GT
3W0906560E1037551019Bentley
3W0906560E10SW005070Bentley
3W0906560F1037551036Bentley
3W0906560F10SW005074Bentley

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page