Original file

Audi S7 V8 2014 Turbo Bosch MED17.1.1 4G0906014 / 4G0906014

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi S7 V8 2014 Turbo, hardware number 4G0906014 and software number 4G0906014, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi S7 V8 2014 Turbo4.0 petrol · 420.0PS / 308.9kW
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
4G0906014
Software number
4G0906014

Technical data

Vehicle
BrandAudi
Car modelS7 V8 2014 Turbo
Engine4.0 petrol
Power420.0PS / 308.9kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4G0906014
Software number4G0906014
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameAudi S7 4.0 TFSI V8
File keybd9609ef5c84bcae
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
ProcessorTC1797
Internal build stringMED17 CB.06.02.01Offset in the file: 0x00E776
Bosch project identifier (EPK)51/1/MED17/5/MED17.1.1//D1711A05C000_MY13A0/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0906014 and software number 4G0906014. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4G09060141037533498Audi pcmflash
4G09060141037537954Audi pcmflash
4G09060141037540687Audi pcmflash
4G090601410SW005872Audi pcmflash
4G09060144H0906014Audi pcmflash
4G0906014A1037533985Audi pcmflash, Audi S6
4G0906014A1037537957Audi pcmflash, Audi S6
4G0906014A1037541533Audi pcmflash, Audi S6

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page