Original file

Audi pcmflash Bosch MED17.1.1 4G0906014B / 1037530298

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi pcmflash, hardware number 4G0906014B and software number 1037530298, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash4.0 petrol 420PS
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0906014B
Software number
1037530298
Vehicle maker's hardware number
4H0906014

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine4.0 petrol 420PS
Power420.1PS / 309.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4G0906014B
Software number1037530298
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key1f4338ba4b5665f3
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
Bosch part / software1037530298Offset in the file: 0x02001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3CE710
Software / calibration4G0906014B · version 0004Offset in the file: 0x3CE72A
Bosch project identifier (EPK)51/1/MED17/5/MED17.1.1//D1711A05C000_MY13B6/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0906014B and software number 1037530298. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4G0906014A10SW012538Audi pcmflash
4G0906014B012630Audi S6 4.0 TFSI
4G0906014B1037528586Audi S7 4.0 TFSI
4G0906014B1037529968Audi S7
4G0906014B1037533849Audi pcmflash, Audi S6 4.0 TFSI
4G0906014B1037540601Audi pcmflash
4G0906014B1037544343Audi pcmflash, Audi S7
4G0906014B10SW012630Audi S7, Audi A, Audi pcmflash

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page