Original file

Audi A 4.0 TFSI Bosch MED17.1.1 4G0906014C / 051677

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi A 4.0 TFSI, hardware number 4G0906014C and software number 051677, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A 4.0 TFSI4.0 petrol 450.0PS / 331.0kW
Control unit
Bosch MED17.1.1
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
4G0906014C
Software number
051677
Bosch part / software
10SW051677
Vehicle maker's hardware number
4H0906014

Technical data

Vehicle
BrandAudi
Car modelA 4.0 TFSI
Engine4.0 petrol 450.0PS / 331.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4G0906014C
Software number051677
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key471ea88ff6c9a9d0
Identification read from the file
ECU nameMED17.1.1
Read typeCalibration only (data set)
Bosch part / software10SW051677Offset in the file: 0x38001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3DE2D4
Software / calibration4G0906014C · version 0008Offset in the file: 0x3DE2EE
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY16B0_050/Dst00//Offset in the file: 0x3FBF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0906014C and software number 051677. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi S6 4.0 TFSIFlash4,096.00 KB€15Add to cart

All reads of 4G0906014C / 051677

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4G0906014B1037544343Audi pcmflash, Audi S7
4G0906014B10SW012630Audi S7, Audi A, Audi pcmflash
4G0906014C005552Audi S6 4.0 TFSI V8
4G0906014C014517Audi C7 4.0 TFSI, Audi S6 4.0 TFSI
4G0906014C1037525905Audi S6 4.0 TFSI V8
4G0906014C1037545086Audi S7, Audi S6
4G0906014C1037547179Audi S6, Audi S7, Audi S6 4.0 TFSI
4G0906014C10SW005552Audi S6, Audi pcmflash

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page